Hello, you have come here looking for the meaning of the word
wet-sanding. In DICTIOUS you will not only get to know all the dictionary meanings for the word
wet-sanding, but we will also tell you about its etymology, its characteristics and you will know how to say
wet-sanding in singular and plural. Everything you need to know about the word
wet-sanding you have here. The definition of the word
wet-sanding will help you to be more precise and correct when speaking or writing your texts. Knowing the definition of
wet-sanding, as well as those of other words, enriches your vocabulary and provides you with more and better linguistic resources.
English
Verb
wet-sanding
- present participle and gerund of wet-sand
Noun
wet-sanding (countable and uncountable, plural wet-sandings)
- Alternative form of wet sanding
- Sanding with fine-grained sandpaper and lubricant.
1986, Roger H. Siminoff, Constructing a Solid-body Guitar: A Complete Technical Guide, →ISBN, page 51:You should anticipate that it will take about four or five applications of three coats each (and subsequent wet-sandings) before the parts are finished.
2005 March, Paul Capello, “Paint Your Case Like a Pro”, in Maximum PC, page 52:When your primer coat is dry, it's on to the wet-sanding to get that paint flat and silky smooth.
2007, Steven Dodd Hughes, Double Guns and Custom Gunsmithing, →ISBN, page 86:The stock pores should be filled by this 400-grit wet-sanding with just a trace of finish left on the surface. One more wet-sanding with 600-grit paper is done, leaving almost no finish on the surface.
- Smoothing damp material with a sponge.
1997, Richard Ziegner, Neil Soderstrom, Walls, Floors & Ceilings, →ISBN, page 47:Wet-sanding with a damp sponge works well too.
2004, Stephen Diller, Janelle Diller, Craftsman's Construction Installation Encyclopedia, →ISBN, page 254:Wet-sanding is done either with regular sandpaper that's been wetted or with a dampened sanding sponge.
2005, Michael W. Litchfield, Renovation, →ISBN, page 356:Using a large sponge to wet-sand drywall joints will definitely reduce dust, but wet-sanding isn't feasible for a project of any size because you must rinse the sponge and change the water continually. Also wet-sanding soaks the paper facing, sometimes dislodges the tape, and tends to round joint compound edges rather than taper them.